Changing channels of the recorder using the remote

You can change channels of the recorder using the number buttons.

Example: for channel 50

Press “5,” “0,” then press ENTER.

Step 6: Initial Setup

Make the basic adjustments by following the on- screen instructions in “Initial Setup.”

Be careful not to disconnect the cables or exit the “Initial Setup” function during this procedure.

[/1

1 2 3

4 5 6

78 9 0

</M/m/,,

ENTER

O RETURN

TV [/1

1 Turn on the recorder and your TV. Then switch the input selector on your TV so that the signal from the recorder appears on your TV screen.

The [LANGUAGE] display appears.

2 Select a language for the on-screen displays using M/m, and press ENTER.

The [Clock Setting] display appears.

3 Set the date, year, and time using </M/ m/,, and press ENTER to start the clock.

You can also use the number buttons.

4 When the Initial Setup is completed, select [Exit] and press ENTER.

If you use the cable box/satellite receiver control, make the necessary settings and check that the control works correctly (page 19).

18