About i.LINK

The DV IN jack on this recorder is i.LINK- compliant for digital video cameras.

i.LINK is a more familiar term for IEEE 1394 data transport bus proposed by SONY, and is a trademark approved by many corporations. IEEE 1394 is an international standard standardized by the Institute of Electrical and Electronics Engineers.

For details on how to dub when this recorder is connected to other video equipment having DV jacks, see page 59.

The DV jack on this recorder can only input DVC- SD signals. It cannot output signals. The DV jack will not accept MICRO MV signals from equipment such as a MICRO MV digital video camera with an i.LINK jack.

For further precautions, see the notes on page 59. For details on precautions when connecting this recorder, also refer to the instruction manuals for the equipment to be connected.

bNote

Normally, only one piece of equipment can be connected to this recorder by the i.LINK cable (DV connecting cable). When connecting this recorder to i.LINK- compatible equipment having two or more i.LINK jacks (DV jacks), refer to the instruction manual of the equipment to be connected.

i.LINK and are trademarks.

Specifications

System

Laser: Semiconductor laser

Timer: Clock: Quartz locked/Timer indication: 12-hour cycle (digital)

Video recording format: MPEG-2

Audio recording format/applicable bit rate: Dolby Digital 2 ch

256 kbps (in HQ and SP mode), 192 kbps (in LP and EP mode), 96 kbps (in ULP mode)

Inputs and outputs

LINE 1 IN

(VIDEO): Phono jack /1.0 Vp-p

(AUDIO): Phono jack/2 Vrms/47 kilohms

LINE 2 IN

(VIDEO): Phono jack/1.0 Vp-p

(AUDIO): Phono jack/2 Vrms/more than

47kilohms

LINE OUT

(VIDEO): Phono jack /1.0 Vp-p

(AUDIO): Phono jack/2 Vrms/600 ohms

AUDIO OUT: Phono jack/2 Vrms/600 ohms

DV IN: 4-pin/i.LINK S100

DIGITAL OUT (COAXIAL): Phono jack/ 0.5 Vp-p/75 ohms

COMPONENT VIDEO OUT (Y, PB, PR):

Phono jack/Y: 1.0 Vp-p,

PB: 0.7 Vp-p, PR: 0.7 Vp-p

SET TOP BOX CONTROL: Mini jack

HDMI OUT: HDMI™ Connector

USB: USB jack Type A

General

Power requirements: 120 V AC, 60 Hz

Power consumption: 20 W

Dimensions (approx.):

430⋅ 53 ⋅ 258 mm (17 ⋅ 2 1/8 ⋅ 10 1/8 inch) (width/height/depth) incl. projecting parts

Mass (approx.): 2.6 kg (5.73 lb)

Operating temperature: 5ºC to 35ºC (41ºF

to 95ºF)

Operating humidity: 25% to 80%

Information Additional

,continued 81