Recording Without the Timer

+RW -RWVR-RWVideo

+R

-R

1

2

3

 

4

5

6

 

7

8

9

 

TITLE LIST

0

 

INPUT

 

 

</M/m/,,

ENTER

DISPLAY

XPAUSE

REC MODE

zREC

TV INPUT

xREC STOP

1 Insert a recordable disc.

2 Press INPUT repeatedly to select the connected input (L1).

3 Select the channel on the cable box/ satellite receiver’s side.

4 Press REC MODE repeatedly to select the recording mode.

Each time you press the button, the display changes on the TV screen as follows:

HQ SP LP EP ULP

For details about the recording mode, see page 35.

5 Press z REC.

Recording starts and “REC” (red) appears in the front panel display.

Recording continues until you stop the recording or the disc is full.

Leave the cable box/satellite receiver turned on and do not change the channel you are recording.

To stop recording

Press x REC STOP. Note that it may take a few seconds for recording to stop.

To pause recording

Press X PAUSE. To restart recording, press the button again.

To watch another TV program while recording

Recording

 

Set your TV to the TV input using the TV INPUT

 

button (page 16) and select the program you want

 

to watch.

 

zHint

If you do not want to watch TV while recording, you can turn off the TV.

bNotes

•After pressing z REC, it may take a short while to start recording.

•You cannot change the recording mode while recording or during recording pause.

•If there is a power failure, the program you are recording may be erased.

•You cannot change the input source during recording.

Using the Quick Timer function

You can set the recorder to record in 10-minute increments.

Press z REC repeatedly to set the duration.

Recording starts after the first press. The Quick Timer starts from the third press, and then each additional press increases the recording time by 10 minutes within the available free space on the disc.

Continue 10M 20M 30M

The remaining recording time appears momentarily on the TV screen.

The time counter in the front panel display decreases to 0:00 (or when the disc is full), then the recorder stops recording (power turns off).

,continued 39