If you cannot get the recorder to control your cable box/satellite receiver

Check the settings at [Set-Top Box Control] in the [Video] setup (page 19).

Check the connection and place the set top box controller near the remote sensor on the cable box/ satellite receiver (page 11).

If your cable box or satellite receiver still does not operate with this recorder, contact your cable or satellite company to see if they can provide you with a compatible cable box or satellite receiver.

To fix the set top box controller to your cable box/satellite receiver

Once you have confirmed that the set top box controller controls your cable box or satellite receiver, affix it in place.

1Attach the supplied double-sided tape to the set top box controller.

Remove the backings on the double-sided tape.

2Affix it so that the set top box controller is near the remote control sensor on your cable box/satellite receiver.

20