2 Select a timer setting and press ENTER.
The Timer Record menu in step 4 of “Timer Recording From Connected Equipment” (page 36) appears.
The input, date, start and stop times, recording mode, and channel for the selected timer setting appear.
3 Press </, to select an item and press M/m to change the setting.
•If you want to return to the Timer List without changing, press TIMER.
4 Press ENTER.
The information for the selected timer setting is updated.
Cancelling the timer settings1 After step 1 above, select a timer setting and press CLEAR.
The display asks for confirmation.
2 Select [OK] and press ENTER.
The selected timer setting is deleted from the Timer List.
•If you want to cancel the deletion, select [Cancel] and press ENTER in step 2.
To turn off the Timer List
Press O RETURN.
When the timer settings overlap
If a timer setting overlaps with another timer setting (i.e., [Duplicate Date] appears in the Timer List), the program that starts first has priority and the second program starts recording only after the first program has finished.
7:00 8:00 9:00 10:00
A
will be cut off |
|
|
| B |
|
|
|
◆When the recordings start at the same time The program that is set first has priority. In this example, timer setting A is set after B, so the first part of timer setting A will not be recorded.
7:00 8:00 9:00 10:00
A
B
◆When the end time of one recording and the start time of another are the same
After finishing the previous recording, the other recording may be delayed.
7:00 8:00 9:00 10:00
A
B
bNotes
•While recording, you cannot change the timer setting for the current recording.
•Even if the timer is set, timer recordings cannot be made while recording a program that has priority.
•Even if the timer is set for the same daily or weekly program, the timer recording cannot be made if it overlaps with a program that has priority. [Duplicate Date] will appear for the overlapped setting in the Timer List. Check the priority order of the settings.
38