![](/images/backgrounds/180142/180142-11223x1.png)
Connecting a VCR or Similar Device
After disconnecting the recorder’s mains lead from the mains, connect a VCR or similar recording device to the LINE IN jacks of this recorder.
For details, refer to the instruction manual supplied with the connected equipment. To record on this recorder, see “Recording from Connected Equipment” on page 49.
Connecting to the LINE 1/DECODER jackConnect a VCR or similar recording device to the LINE 1/DECODER jack of this recorder.
VCR | TV |
| |
| SCART cord (not supplied) |
| to SCART input |
to i LINE 1/DECODER | to T LINE 3 – TV |
DVD recorder
bNotes
•Pictures containing copy protection signals that prohibit any copying cannot be recorded.
•If you pass the recorder signals through a VCR, you may not receive a clear image on your TV screen.
DVD recorder |
|
|
| VCR |
|
|
| TV |
|
|
|
|
|
|
|
|
|
Be sure to connect your VCR to the DVD recorder and to your TV in the order shown below. To watch video tapes, watch the tapes through a second line input on your TV.
Line input 1
VCR |
|
| DVD recorder |
|
| TV |
Line input 2
•The SMARTLINK features are not available for devices connected via the DVD recorder’s LINE 1/ DECODER jack.
•To watch the connected VCR or similar device’s pictures through the recorder while the recorder is in standby mode, set “Power Save” to “Off” (default) in the “Basic” setup (page 76).
•When you record to a VCR from this DVD recorder, do not switch the input source to TV by pressing the TV/DVD button on the remote.
•If you disconnect the recorder’s mains lead, you will not be able to view the signals from the connected VCR.
Settings and Hookups
,continued 23