Recording from connected equipment without a timer
+RW
You can record from a connected VCR or similar device. To connect a VCR or similar device, see “Connecting a VCR or Similar Device” on page 23.
1 Insert a recordable DVD.
2 Press INPUT to select an input source according to the connection you made.
The front panel display changes as follows:
programme position
3 Select the desired audio signal when recording a bilingual programme to
Set “External Audio” to “Bilingual” and “Bilingual Recording” to “A/L” or “B/R” in the “Audio In” setup (page 81).
4 Press REC MODE repeatedly to select the recording mode.
For details about the recording mode, see page 41.
5 Insert the source tape into the connected equipment and set to playback pause.
6 Press z REC.
This recorder starts recording.
7 Press the pause (or play) button on the connected equipment to cancel the playback pause status.
The connected equipment starts playback and the playback image is recorded by this recorder.
To stop recording, press x REC STOP on this recorder.
zHint
You can adjust the settings for the recording picture before recording. See “Adjusting the recording picture quality” on page 46.
bNotes
•When recording a video game image, the screen may not be clear.
•Any programme that contains a
•When “Bilingual Recording” is set to “A/L” or “B/R” in step 3, you cannot select the sound when playing in the following cases.
–When recording in PCM mode.
–When recording to DVD+RW/DVD+R/DVD-
•You cannot select “L1” in step 2 if “LINE 1 In” is set to “Decoder” in the “Video In/Out” setup (page 80).
Recording Timer
51