Recording does not stop immediately after you press x REC STOP.
,It will take a few seconds for the recorder to input disc data before recording can stop.
Recording does not stop after you press x.
,Press x REC STOP.
Timer recording is not complete or did not start from the beginning.
,There was a power failure during recording. If the power recovers when there is a timer recording, the recorder resumes recording. Should the power failure continue for more than 1 hour, reset the clock (page 75).
,Another timer setting overlapped the timer setting (page 48).
,Disc space was not sufficient.
,The VPS/PDC function is working.
Contents previously recorded were erased.
,Data that is not playable on this recorder but was recorded on a DVD with a PC will be erased from the disc when the disc is inserted.
The VPS/PDC function does not operate.
,Check that the clock and date are set correctly.
,Check that the VPS/PDC time you set is correct (there might be a mistake in the TV programme guide). If the broadcast you wanted to record did not send the correct VPS/PDC information, the recorder will not start recording.
,If the reception is poor, the VPS/PDC signal might be altered and the recorder might not start recording.
Recording from the connected equipment with a timer
Nothing was recorded even though you set the
,You forgot to turn off the connected equipment. Turn off the connected equipment and set the recorder to Synchro- Recording standby mode (page 49).
,The recorder was not set to the Synchro- Recording standby mode. Set the recorder to stand by for
,The equipment is not connected to the LINE 1/DECODER jack of the recorder.
,The recorder is connected to the TV output jack of the connected equipment.
,The
,The timer setting for the connected equipment overlapped the recorder’s timer setting (page 50).
,There was a power failure during the recording.
,The [/1 button was pressed before
The recorder automatically starts recording when the satellite receiver is turned on.
,The Synchro Rec function was activated. Turn off the satellite receiver and cancel the Synchro Rec function (page 49).
DisplayThe clock has stopped.
,Set the clock again (page 75).
,The clock stopped due to a power failure that lasted for more than 1 hour. Reset the clock (page 75).
The timer indicator is flashing.
,The disc does not have enough space.
,Insert a recordable disc into the recorder.
,The inserted DVD is protected (page 36).
Information Additional
,continued 97