MPEG Output (DVD VIDEOs only)

Selects the type of MPEG audio signal.

MPEG

Select this when the

 

recorder is connected to an

 

audio component with a

 

built-in MPEG decoder.

 

 

MPEG ->

Select this when the

PCM

recorder is connected to an

 

audio component without a

 

built-in MPEG decoder. If

 

you play MPEG audio

 

sound tracks, the recorder

 

outputs stereo signals via

 

the DIGITAL OUT

 

(COAXIAL) jack.

 

 

bNote

If the HDMI OUT jack is connected to equipment not compatible with MPEG audio signals, the PCM signals will be automatically output even when you select “MPEG.”

Audio DRC (Dynamic Range Control) (DVDs only)

Selects the dynamic range (difference between soft and loud sounds) setting when playing a DVD that conforms to “Audio DRC.” This affects the output from the following jacks:

–LINE 2 OUT R-AUDIO-L jacks

–LINE 3 – TV jack

–LINE 1/DECODER jack

–DIGITAL OUT (COAXIAL)/HDMI OUT jack only when “Dolby Digital Output” is set to “Dolby Digital -> PCM” (page 82).

On

Makes low sounds clear

 

even if you turn the volume

 

down.

 

 

Off

Normally select this

 

position.

 

 

Language Settings (Language)

The “Language” setup allows you to adjust language settings.

1 Press SYSTEM MENU while the recorder is in stop mode.

2 Select “Initial Setup,” and press

ENTER.

3 Select “Language,” and press ENTER.

The “Language” setup appears with the following options. The default settings are underlined.

OSD Language

Switches the display language on the screen.

Audio Language (DVD VIDEO only)

Switches the language of the sound track.

Subtitle Language (DVD VIDEO only)

Switches the language of the subtitles recorded on the disc.

Adjustments and Settings

,continued 83