Aerial Reception
Settings (Tuner)
The “Tuner” setup helps you to make tuner and programme position settings for the recorder.
1 Press SYSTEM MENU while the recorder is in stop mode.
2 Select “Initial Setup,” and press
ENTER.
3 Select “Tuner,” and press ENTER.
The “Tuner” setup appears with the following options. The default settings are underlined.
To turn off the display, press SYSTEM MENU.
Auto Channel SettingAuto Scan
If you connect a TV to this recorder not using SMARTLINK, you can preset programme positions automatically using “Auto Scan.”
1Select “Auto Channel Setting” in “Tuner,” and press ENTER.
2Select “Auto Scan,” and press ENTER.
3Select your country/region using </,, and press ENTER.
The programme position order will be set according to the country/region you set. If any programme positions are unused or contain unwanted channels, you can disable them (page 78).
Download from TV
If you connect a TV to this recorder with SMARTLINK, you can preset programme positions by downloading from your TV. For details, refer to the operating instructions supplied with your TV.
1Select “Download from TV,” and press
ENTER.
2Select your country/region using </,, and press ENTER.
The tuner preset data will be downloaded from your TV to this recorder.
If any programme positions are unused or contain unwanted channels, you can disable them (page 78).
Manual CH SettingPresets programme positions manually.
If some programme positions could not be set using the “Easy Setup” function, you can set them manually.
If there is no sound or if the picture is distorted, the wrong tuner system may have been preset during “Easy Setup.” Set the correct tuner system manually in the steps below.
1Select “Manual CH Setting” in “Tuner,” and press ENTER.
2Select “Next Screen,” and press ENTER.
3Select your country/region using </,, and press ENTER.
Programme position
4Press ./> to select the programme position.
5Select the item you want to change using M/m, and change the settings using </ ,, then press ENTER.
•To preset another programme position, repeat from step 4.
Adjustments and Settings
,continued 77