Audio Output

Selects the type of audio signal output from the HDMI OUT jack.

Auto

Outputs Dolby Digital,

 

MPEG and DTS audio

 

signals as a bitstream

 

signal. Normally select

 

this position.

 

 

PCM

Converts all audio signals

 

except for DTS signals to

 

PCM.

 

 

Bitstream

Select this if the

Priority

connected device is

 

compatible with bitstream

 

audio.

 

 

bNotes

•The PCM signals may not be output even when you select “Auto” depending on the “Audio Out” settings, number of audio channels, and the HDMI-connected device.

•The “Audio Output” function is not available when a DVI device is connected.

HDMI Control

On

Allows you to use the

 

HDMI control features

 

(page 15).

 

 

Off

Turns off the function.

 

 

Other Settings (Options)

The “Options” setup allows you to set up other operational settings.

1 Press SYSTEM MENU while the recorder is in stop mode.

2 Select “Initial Setup,” and press

ENTER.

3 Select “Options,” and press ENTER.

The “Options” setup appears with the following options. The default settings are underlined.

On Screen Display

On

Automatically displays

 

information on the screen

 

when the recorder is turned

 

on, etc.

 

 

Off

Displays information only

 

when DISPLAY is pressed.

 

 

Front Panel Display

Adjusts the lighting of the front panel display.

On

Bright lighting.

 

 

Off

Turns off the lighting when

 

the power is off.

 

 

Adjustments and Settings

,continued 91