4 Getting Started | Installer Guide |
|
A. Typical Appliance System
NOTICE: Illustrations and photos reflect typical installations and are for design purposes only. Illustrations/diagrams are not drawn to scale. Actual product may vary from pictures in manual
VERTICAL TERMINATION CAP (SECTION 10.K)
MAINTAINS MINIMUM CLEARANCE
AROUND PIPE (SECTION 10.I)
VENT PIPE (SECTIONS 7 & 8) 
CEILING FIRESTOP ON FLOOR OF ATTIC (SECTION 8.C)
FRAMING/HEADER (SECTION 5.C)
STORM COLLAR (SECTION 10.J)
VENT PIPE PENETRATES ROOF
PREFERABLY WITHOUT AFFECTING
ROOF RAFTERS (SECTIONS 8 and 10)
ATTIC INSULATION SHIELD (NOT SHOWN) MUST BE USED HERE TO KEEP INSULATION AWAY FROM VENT PIPE IF ATTIC IS INSULATED (SECTION 8.D)
FRAMING HEADED OFF IN CEILING JOISTS (SECTION 8.C)
OPTIONAL WALL SWITCH SECTION 12.C.
MANTEL AND
MANTEL LEG (SECTION 5.D)
SURROUND
HEARTH EXTENSION
GAS LINE (SECTION 11)
Figure 4.1 Typical System
18 | Heat & Glo • |
