Hearth & Home Technologies disclaims any responsibility for, and the warranty will be voided by, the following actions:
•Installation and use of any damaged system component.
•Modification of the system component.
•Installation other than as instructed by Hearth & Home Technologies.
•Installation and/or use of any component part not approved by Hearth & Home Technologies.
Any such action may cause a fire hazard.
•Read, understand and follow these instructions for safe installation and operation.
Fireplace Specific Information
Standard fireplace features vary. Consult the installation manual for available options.
The optional AUX300CE receiver provides additional fea- tures: Fan control and two Aux functions.
The
Kit Contents
REM300-HNG-AU
•
•AAA Batteries (3)
•Wall Holder
•Drywall Anchor (2)
•Screws (2)
Introduction
The RC300AU multifunctional remote control is de- signed to control pilot light, flame height, blower speed, and up to two
operation of this remote control device.
Installation Precautions
The installation of this remote control must be performed by a qualified service technician. This remote control is tested and safe when installed in accordance with this installation manual. Do not install any components that may be damaged.
Do not modify, disassemble, or substitute any of the com- ponents included with this kit. Installation of this unit must be done by a qualified service technician.
Placement of this remote control may affect performance. An assessment of the space should be done prior to in- stallation for optimum performance.
Determine Location
Determine the location for the remote control. The selected location should be in the same space as the gas fireplace. Never place this unit in a separate room. The remote control must be placed within 30 ft. (9.14 m) of the fireplace but should not be exposed to extreme heat.
The RC300AU is approved for interior installation and should not be used in exterior applications.
• Keep remote control out of reach of children.
50 | Heat & Glo • |
