Heat & Glo LifeStyle 2197-980 E. Log Placement Instructions, Log Assembly: LOGS-SOHOCE, 2 3 1

E. Log Placement Instructions Log Assembly: LOGS-SOHOCE

2

3

1

LOCATING TABS

Figure 14.1 Figure 14.2

CAUTION: Logs are fragile. Carefully remove the logs from the packaging.

1

Figure 14.3

2

Figure 14.4

1

Step 1. Place Log #1 (SRV2111-700)against rear right tab with its slot over center locating tab.

2 1 3

Figure 14.5

Step 3. Place Log #3 (SRV2111-702)so the top rests on Log #1 against Log #2. The base slot on Log #3 will fit over the locating tab on the front right hand side.

Step 2. Place Log #2 (SRV2111-701) onto base pan such that Log #2 fits in groove of Log #1. Push it back against the left hand side locating tab. Ensure burner ports are not covered by logs.

Heat & Glo • SOHO-N-AUB • 2197-980 Rev. F • 5/12 59