Specifications

System

Laser: Semiconductor laser

Channel coverage:

PAL/SECAM (B/G, D/K, I, L)

VHF: E2 to E12, R1 to R12, F2 to F10, Italian A to H, Ireland A to J, South Africa 4 to 13/ UHF: E21 to E69, R21 to R69, B21 to B69, F21 to F69/CATV: S01 to S05, S1 to S20, France B to Q/HYPER: S21 to S41

The above channel coverage merely ensures the channel reception within these ranges. It does not guarantee the ability to receive signals in all circumstances.

Video reception: Frequency synthesizer system

Audio reception: Split carrier system

Aerial out: 75-ohm asymmetrical aerial socket

Timer: Clock: Quartz locked/Timer indication: 24-hour cycle (digital)/Power back-up duration: 1 hour

Video recording format: MPEG VideoAudio recording format/applicable bit

rate: Dolby Digital 2 ch/256 kbps

DIGITAL OUT (OPTICAL): Optical output jack/ –18 dBm (wave length: 660 nm)DIGITAL OUT (COAXIAL): Phono jack/

0.5Vp-p/75 ohms

COMPONENT VIDEO OUT (Y, PB/CB, PR/CR):

Phono jack/Y: 1.0 Vp-p, PB/CB: 0.7 Vp-p,

PR/CR: 0.7 Vp-p

HDMI OUT: Type A (19-pin)

GeneralPower requirements: 220-240 V AC, 50/

60 Hz

Power consumption: 55 W

Dimensions (approx.): 430 ⋅ 75 ⋅ 328 mm (width/height/depth) incl. projecting parts

Hard disk drive capacity: 400 GBMass (approx.): 5.2 kgOperating temperature: 5ºC to 35ºCOperating humidity: 25% to 80%Supplied accessories:

Mains lead (1)

Aerial cable (1)

Remote commander (remote) (1)

R6 (size AA) batteries (2)

Specifications and design are subject to change without notice.

Inputs and outputsLINE 2 OUT

(AUDIO): Phono jack/2 Vrms/10 kilohms

(VIDEO): Phono jack/1.0 Vp-p

(S VIDEO): 4-pin mini DIN/Y: 1.0 Vp-p,

C:0.3 Vp-p (PAL)

LINE 2 IN/LINE 4 IN

(AUDIO): Phono jack/2 Vrms/more than 22 kilohms

(VIDEO): Phono jack/1.0 Vp-p

(S VIDEO): 4-pin mini DIN/Y: 1.0 Vp-p,

C:0.3 Vp-p (PAL)

LINE 1 – TV: 21-pin

CVBS IN/OUT S-Video/RGB OUT (upstream)

LINE 3/DECODER: 21-pin

CVBS IN/OUT S-Video/RGB IN S-Video OUT (downstream) Decoder

DV IN: 4-pin/i.LINK S100

Compatible colour systems

This recorder is designed to record using the PAL colour system and play back using the PAL or NTSC colour systems.

The signals of the SECAM colour system can be received or recorded but played back in the PAL colour system only. Recording of video sources based on other colour systems cannot be guaranteed.

104