Sony RDR-HX1010 To stop during recording, 9Select “OK,” and press ENTER, 10 Select “Start,” and press ENTER

9Select “OK,” and press ENTER.

The default title name is fixed, and the display asks if you want to start recording.

To change the disc media, select “Media” and press M/m. To change the dubbing mode, select “Dub Mode” and press M/m.

DV Dubbing			2.6GB
Change the dubbing mode if necessary.
Select "Start" to start dubbing.
	Media	Dub Mode
			Start
	DVD	SP 0.8GB
			Cancel

Data capacity required for the dubbing.

10 Select “Start,” and press ENTER.

The recorder starts recording the tape contents as programmed.

•If the recording does not fit due to the dubbing mode you selected, the display asks if you want to continue.

To change the dubbing mode, select “Reset” and repeat from step 9.

To have the recorder adjust the dubbing mode, select “Auto Dub Mode.”

•If there is not enough disc space even after changing the dubbing mode, the display asks if you want to record halfway.

To continue, select “OK.”

To stop during recording

Open the remote’s cover and press x REC STOP. Note that it may take a few seconds for the recorder to stop recording.

bNotes

•Contents recorded to the HDD or a DVD may not be recorded as programmed if the tape’s time code is not sequential or there are blanks between the recordings on the tape. In this case, see “Recording from connected equipment without a timer” on page 52.

•The start and end points of a programme may be different from what you have set if the source DV/ Digital8 format tape is in any of the following conditions:

–Recording mode was changed during the recording.

–There is a blank space in the recorded portion of the tape.

•If you set the beginning of the tape as the IN point and the end point as the OUT point, the IN and OUT points may move slightly during dubbing.

•You cannot set a scene to be shorter than one second.

Dubbing DV

81