bNote

If you set the recording mode to be changed while dubbing from a DVD to the HDD, the sound recorded in the source (DVD) is applied regardless of this setting.

DVD Bilingual Rec. (for all recordable discs except DVD-RW in VR mode)

Selects the sound to be recorded on the recordable disc. This setting is not necessary when recording on DVD-RWs (VR mode) that record both the main and sub sounds.

Main

Records the main sound for the

 

bilingual programme.

 

 

Sub

Records the sub sound for the

 

bilingual programme.

 

 

Dimmer

Adjusts the lighting of the front panel display.

Normal

Bright lighting.

 

 

Power

Low lighting. Turns off the

Save

lighting when the power is off.

 

 

bNote

When “Power Save” in “Options” setup is set to “On,” the front panel display is turned off during standby regardless of this setting.

Power Save

Selects whether this recorder is in power save mode when the power is turned off (standby).

On

Sets to power save mode. The

 

front panel display is off when the

 

recorder is in standby.

 

 

Off

Does not set to power save mode.

 

Normally, select this.

 

 

bNotes

•Power Save mode does not function in the following cases, even when “Power Save” is set to “On.”

–Synchro Recording is set.

–there is a timer setting with “PDC/VPS” set to “On” in the Timer List.

•The SMARTLINK features are not available when “Power Save” is set to “On.”

Auto Display

On

Automatically displays

 

information on the screen when

 

the recorder is turned on, etc.

 

 

Off

Displays information only when

 

DISPLAY is pressed.

 

 

Command Mode

Changes the Command Mode of the recorder if other DVD equipment is assigned the same Command Mode. Be sure to match the Command Mode switch on the remote to the setting made here. For details, see “If you have a Sony DVD player or more than one Sony DVD recorder” on page 21.

DVD1

Select this if the default Command

 

Mode conflicts with other DVD

 

equipment.

 

 

DVD2

Select this if the default Command

 

Mode conflicts with other DVD

 

equipment.

 

 

DVD3

The default Command Mode of

 

the recorder.

 

 

Factory Setup

Allows you to select the setup settings by group, and return them to their default settings. Note that all of your previous settings will be lost.

1Select “Factory Setup” in “Options,” and press , or ENTER.

The display for selecting a group of settings appears.

2Select the group of settings you want to return to default from “Settings,” “Video,” “Audio,” “Features,” “Options,” “Parental Control,” and “All,” and press , or ENTER.

3Select “Start,” and press ENTER.

The selected settings return to their default settings.

4Press ENTER when “Finish” appears.

Adjustments and Settings

95