Sony RDR-HX1010 Using the Quick Timer function, To cancel the Quick Timer, Select “OK,” and press ENTER, Select “OK,” and press ENTER, 3Select “OK,” and press ENTER

3Select “OK,” and press ENTER.

The date, start and stop times, programme position, recording mode, etc. setting (page 44) appear.

Using the Quick Timer function

You can set the recorder to record in 30-minute increments.

Timer - VIDEO Plus+

Is the following timer setting correct? To modify, adjust each item or re-enter the timer code.

OK

Cancel

Press z REC repeatedly to set the duration.

Each press advances the time in 30-minute

Date	Start		Stop		Prog.	Media Mode			Details
Wed 28.9	21	00	22	00	AAB		HDD	SP
									Change

PDC/VPS On Update Off

•If you want to change the setting, press </ , to select the item and press M/m to change the setting. For the PDC/VPS or Update functions, select “Details” and change the settings (page 44).

To re-enter the ShowView number, select “Change.”

4Select “OK,” and press ENTER.

The TIMER REC indicator lights up on the front panel, and the recorder is ready to start recording.

To stop recording during timer recording

Open the remote’s cover and press x REC STOP. Note that it may take a few seconds for the recorder to stop recording.

If the timer settings overlap

See page 44.

To extend the recording duration time while recording

See page 44.

To confirm, change, or cancel timer recording

See “Checking/Changing/Cancelling Timer Settings (Timer List)” on page 48.

zHint

The Rec Mode Adjust function also works with this timer method (page 44).

increments. The maximum duration is six hours.

0:30 1:00 5:30 6:00 (normal recording)

The time counter decreases minute by minute to 0:00, then the recorder stops recording (power does not turn off). Even if you turn off the recorder during recording, the recorder continues to record until the time counter runs out.

Note that the Quick Timer function does not work if “TV Direct Rec” is set to “On” in “Features” setup (page 92).

To cancel the Quick Timer

Press z REC repeatedly until the counter appears in the front panel display. The recorder returns to normal recording mode.

46