8 When you finish adding scenes, press m.
The scene list is displayed.
ATotal duration of the scene
BTotal number of scenes
CScene information block
9 Select the scene information block you want to edit using </,, and press ENTER.
The
“Move”: Changes the scene order using </, and ENTER.
“Erase”: Erases the scene. When asked for confirmation, select “OK.” “Preview”: Plays the selected scene.
•To add more scenes, press M and go to step 4.
10 When you finish editing the scene list, select “OK,” and press ENTER.
The display for entering the title name appears. To enter a new name, select “Enter,” and follow the explanations on page 42.
11 Select “OK,” and press ENTER.
The title name is fixed, and the display asks if you want to start recording.
To change the disc media, select “Media” and press M/m. To change the dubbing mode, select “Dub Mode” and press M/ m.
Data capacity required for the dubbing. This is displayed in red when the size exceeds the available space on the dubbing target media.
12 Select “Start,” and press ENTER.
The recorder starts recording the tape contents as programmed.
To stop during recording |
| |||
Press x REC STOP. |
| |||
Note that it may take a few seconds for the |
| |||
recorder to stop recording. |
| |||
To automatically adjust the dubbing mode |
| |||
If there is not enough available space on the |
| |||
target disc, the recorder automatically selects |
| |||
a dubbing mode with lower picture quality |
| |||
according to the available space. The same |
| |||
dubbing mode is set for all of the titles. If disc |
| |||
DV | ||||
space is insufficient for the selected dubbing | ||||
Dubbing | ||||
mode, the following display appears after | ||||
| ||||
step 12. |
| |||
|
|
|
| |
Select “OK” and go to step 12.
If you do not want to change the dubbing mode, select “Cancel.” However, note that dubbing will end before the title is finished.
bNotes
•If you set the beginning of the tape as the IN point and the end point as the OUT point, the IN and OUT points may move slightly during dubbing.
•You cannot set a scene to be shorter than one second.
119