HDD +RW
You can label a DVD, title, or programme by entering characters. You can enter up to 64 characters for a title or disc name, but the actual number of characters displayed in the menus such as the Title List will vary. The steps below explain how to change the name of the recorded programme.
Number |
|
buttons | INPUT |
| SELECT |
TITLE LIST
</M/m/,,
ENTER
1 Press TITLE LIST.
2 Select a title, and press ENTER.
The
3 Select “Title Name,” and press
ENTER.
The display for entering characters appears.
4 Press </M/m/, to move the cursor to the right of the display and select “A”
The characters for the selected type are displayed.
5 Press </M/m/, to select the character you want to enter, and press
ENTER.
The selected character appears at the top of the display.
Example: Input Title Name
The type of characters will change according to the language you select in “Easy Setup.” Some languages allow you to enter an accent mark.
To enter a letter with an accent mark, select an accent followed by the letter. Example: Select “ ` ” and then “a” to enter “à.”
To insert a space, select “Space.”
6 Repeat steps 4 and 5 to enter the remaining characters.
Input row
To erase a character, move the cursor to the right of the character at the input row. Select “Back” and press ENTER.
To insert a character, move the cursor to the right of the point where you want to insert the character. Select the character and press ENTER.
To erase all of the characters, select “Clear All” and press ENTER.
7 Select “Finish,” and press ENTER.
To cancel the setting, select “Cancel.”
42