bNote

When picture noise appears after you set the recorder to progressive format, hold down x, and press PROGRAM – (minus) on the unit.

Scart Setting

Sets the method of inputting/outputting signals from the SCART jacks on the rear panel of the recorder. Select an option for each of the items below according to the combination of jacks and methods that you are going to use.

Line1 Output

Selects a method of outputting video signals for the LINE 1 – TV jack.

RGB

Outputs RGB signals.

Video Outputs video signals.

S Video Outputs S-video signals.

bNotes

•If your TV does not accept S-video or RGB signals, the image will not be displayed in the selected method on the TV screen even if you select “S Video” or “RGB.” See the instructions supplied with your TV.

•You cannot select “RGB” when “Component Out” above is set to “On.”

•SMARTLINK is available only when “Video” is selected.

Line3 Input

Selects a method of inputting video signals for the LINE 3/DECODER jack. The picture will not be clear if this setting does not match the type of video input signal.

Video/ Inputs video signals or RGB

RGB signals.

Decoder* Select this when connecting to a PAY-TV/Canal Plus analogue decoder. If you connect to a cable box/ satellite receiver such as CanalSat, do not select this option.

S Video Inputs S-video signals.

* Analogue Mode only

Line3 Output

Selects a method of outputting video signals for the LINE 3/DECODER jack.

Video

Outputs video signals.

S Video Outputs S-video signals.

Pause Mode (HDD/DVDs only)

Selects the picture quality in pause mode.

Auto

The picture, including

 

subjects that move

 

dynamically, is output with

 

no jitter. Normally select this

 

position.

 

 

Frame

The picture, including

 

subjects that do not move

 

dynamically, is output in high

 

resolution.

 

 

Colour System

Selects the colour system when playing VIDEO CDs (including Super VIDEO CDs)/ DivX video files.

PAL

Plays a disc in PAL colour

 

system.

 

 

NTSC

Plays a disc in NTSC colour

 

system.

 

 

Auto Display

On

Automatically displays

 

information on the screen

 

when the recorder is turned

 

on, etc.

 

 

Off

Displays information only

 

when DISPLAY is pressed.

 

 

Screen Saver

The screen saver image appears when you do not use the recorder for more than 10 minutes while an on-screen display, such as the System Menu, is displayed on your TV screen. The screen saver image helps prevent your display device from becoming damaged (ghosting).

On

Turns on the screen saver

 

function.

 

 

Off

Turns off the function.

 

 

142