zHint

For correct speaker location, see the operating instructions supplied with the connected components.

bNotes

•Do not connect your TV’s audio output jacks to the LINE IN (R-AUDIO-L) jacks at the same time. This will cause unwanted noise to come from your TV’s speakers.

•With connection B, do not connect the LINE IN (R-AUDIO-L) and LINE 2 OUT (R-AUDIO-L) jacks to your TV’s audio output jacks at the same time. This will cause unwanted noise to come from your TV’s speakers.

•With connection A, after you have completed the connection, make the appropriate settings under “Easy Setup - Audio Connection” (page 27).

Otherwise, no sound or a loud noise will come from your speakers.

•When you connect the recorder to an AV amplifier (receiver) using an HDMI cord, you will need to do one of the following:

–Connect the AV amplifier (receiver) to the TV with the HDMI cord.

–Connect the recorder to the TV with a video cord other than HDMI cord (component video cord, S VIDEO cord, or audio/video cord).

*1 Manufactured under license from Dolby Laboratories.

“Dolby” and the double-D symbol are trademarks of Dolby Laboratories.

*2 “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.

Step 4: Connecting the Mains Lead

Connect the supplied mains lead to the AC IN terminal of the recorder. Then plug the recorder and TV mains leads (power cords) into the mains. After you connect the mains lead, you must wait for a short while before operating the recorder. You can operate the recorder once the front panel display lights up and the recorder enters standby mode.

If you connect additional equipment to this recorder (page 30), be sure to connect the mains lead after all connections are complete.

1 to AC IN

2

to mains

Settings and Hookups

23