Setting
To watch or record
In order to set the programme positions correctly, be sure to follow all of the steps below.
Number buttons
SYSTEM
MENU
</M/m/,,
ENTER
O RETURN
1 Press SYSTEM MENU.
The System Menu appears.
2 Select “SETUP,” and press ENTER.
3 Select “Video,” and press ENTER.
4 Select “Scart Setting,” and press
ENTER.
5 Press M/m to select “Video” or “RGB” for “Line1 Output,” “Decoder” for “Line3 Input,” and “Video” for “Line3 Output,” and press ENTER.
The “Video” setup display appears again.
6 Press O RETURN to return the cursor to the left column.
7 Select “Basic,” and press ENTER.
8 Select “Programme Setting,” and press ENTER.
9 Press M/m to select the desired programme position, and press
ENTER.
Settings and Hookups
,continued 33