4Select the component by pressing the Component Select button or the Label key.
TV
The selected component name appears on the Mode Display key. The macro keys flash. To change the Label keys, press the Mode Display key (in this case, TV).
If you select the component name for which the Key Macro function cannot be programmed
“NG” flashes twice and “NG” sound is heard.
5Select the macro key by pressing the Label key.
If you press the Label key for which the Key Macro function cannot be programmed
“NG” flashes twice and “NG” sound is heard.
To change the name of the macro key
Keep the macro key pressed for more than 2 seconds, and follow Steps 2 - 5, page 25.
6Press the keys for the operation in order (1 t 2 t 3 t ENTER).
Note
If you enter more than four keys, the last four keys are programmed for the macro key.
Tip
You can also program other component functions for the same macro key. After pressing the Component Select button or OTHER button, press a Label key you want to program.
7Press the macro key (in this case, VIDEO 4).
“1,” “2,” “3,” and “ENTER” appear twice.
VIDEO4
8 Press COMMANDER OFF.
The selected label lights on the Label key. And other keys flash.
COMMANDER
OFF
If you keep COMMANDER OFF pressed for more than 2 seconds
The Commander turns off.
If you keep COMMANDER OFF pressed for less than 2 seconds
The Commander returns to the previous setting mode.
Continued 63