Method 2: USE PINCODE SETTING
Step 1: Power on the wireless AP and the wireless network camera. Wait for 1 minute for both devices to be up and running.
Step 2: Open web browser and logo in wireless server. Go to wireless/WPS setting page.
Step 3: Open web browser and logo in wireless network camera. Go to network/Wireless setting page. And find
Step 4: Please find the pin Code on both setting page and key in it in each “Configure via Pin Code”. Then push “Start PIN” button on page. .
Step 5: Waiting for 30 seconds. When the network LED of the camera is blinking, WPS is successfully done.
Step 6: If you have more than 1 camera, repeat step 2~5.
IP Camera Page
AP Setting Page
32
