The descriptions of every item are listed as follow:
Item | Description |
Select Camera | All IP camera’s Please select an IP camera from the list |
| to setup its recording behavior. EdiView will attempt |
| to connect to selected IP camera, if it’s not |
| connectable, you’ll receive an error message later. |
Record Mode | You can decide the recording behavior for this IP |
| camera: |
| Monitor only, not record: EdiView will not record video |
| of this IP camera. |
| |
| camera all the time. |
| Motion Detection: EdiView will only record video |
| when motion is detected. |
| Apply to All Cameras: Click this button to apply current |
| record control settings to all IP cameras on the list. |
Motion Detection | Sets motion detection area and sensitivity. Please |
Setting | select an IP camera from the list, and its video will |
| appear with a grid pattern: |
|
|
78
