Edimax Technology PT-31W user manual 3-8PTZ Control RS-485

Enable	Check this box to enable this motion detection window. You can select
(Window 1 to	window 1 to 3 to enable up to 3 motion detection windows. When a
Window 3)	motion detection window is enabled, a rectangular will appear on
	camera’s view, with its title on the top.
	- To move / resize a motion detection window:
	- Move: Use the mouse to drag the title text.
	- Resize: Use the mouse the drag the four corners (upper-left/right,
	lower-left/right) to resize it. If you only want to adjust width or
	height, drag the four sidebars (top, bottom, left, and right).
Title	Input characters in title field to change motion detection area’s title text
(Window 1 to	so you can identify it.
Window 3)	Please note that you have to click ‘Apply’ button and the text will
	change.
Percentage	Select the percentage of pixel change that will trigger motion detection
	alert. Select a lower percentage and you can detect tiny changes in
	motion detection area.
Sensitivity	Select the sensitivity level that will trigger motion detection alert. Select
	a higher sensitivity and you can detect tiny changes in motion detection
	area.

When you finish with above settings, click ‘Apply’ button to save changes.

3-8 PTZ Control (RS-485)

If you mount the IP camera on pan-tilt camera cradles that support pan-tilt control via RS-485 connection, you can use this function to control pan-tilt camera cradle so you can control the orientation of IP camera from remote place.

41