Edimax Technology PT-31W user manual Same domain name

	same domain name.
	Receiver: Input the E-mail receiver’s address
	here.
	CC: input additional E-mail receiver’s address
	here.
	Subject: Input the subject of sent E-mail. This
	will also help you to identify the E-mail sent by
	EdiView .
	Number of attachments: Input the number of
	snapshot attachments that will sent with E-mail,
	so you can see the image of camera by E-mail (1
	to 10 attachments only).
	Email alerts Interval: Input the time interval
	between two E-mails. A new E-mail will not be
	sent within the interval you specified here even
	a new event is detected.
	User: Input the user name for SMTP
	authentication. Input only when it’s required by
	your SMTP server, you can leave it blank if it’s
	not required.
	Password: Input the password used by SMTP
	authentication.
Camera Scan Interval	Input the time interval to wait between camera
	scan.
Connection Retry	Decides the behavior when EdiView lost
	communication with IP camera:
	Retry: Retry for the time you specified here.
	Always retry: Retry to connect to IP camera
	until successfully connected.

When you finishes setting, click ‘OK’ button to save changes you made, or click ‘Cancel’ button to discard all settings you made.

83