1Follow Steps 1 - 4 on page 41.
2Select the component name whose interval you want to change by pressing the Component Select button or the Label key.
(To change the Label keys, press the OTHER button repeatedly.)
3Press the KEY key.
The keys of the selected component appear as set at the factory.
0 second: Stays lit
1 second: Flashes
2 seconds: Flashes slowly
4Press the key you want to adjust.
The beaming time is changed with each press of the key (from 0 to 2 seconds).
5Press the COMMANDER OFF button.
COMMANDER
OFF
If you hold COMMANDER OFF pressed for more than 2 seconds
The Commander turns off.
If you hold COMMANDER OFF pressed for less than 2 seconds
The Commander returns to the previous setting mode.
87