Toshiba RAV-SP564ATZG-E Indoor Controls Slim Duct Type, Outline of specifications, Remarks

8-2. Indoor Controls (Slim Duct Type)

No.	Item			Outline of specifications						Remarks
1	When power	1)	Distinction of outdoor unit
	supply is reset		When the power supply is reset, the outdoors are distin-
			guished and the control is selected according to the
			distinguished result.
		2)	Setting of indoor fan speed and existence of air direction
			adjustment
			Based on EEPROM data, select setting of the indoor fan							Air speed (rpm)/
			speed and the existence of air direction adjustment.							Air direction adjustment
2	Operation	1)	Based on the operation mode selecting command from the
	mode selection		remote controller, the operation mode is selected.
			Remote controller					Control outline
				command
				STOP		Air conditioner stops.
				FAN		Fan operation
				COOL		Cooling operation
				DRY		Dry operation
				HEAT		Heating operation				Ta: Room temp.
				AUTO		• COOL/HEAT operation mode is
										Ts: Setup temp.
							automatically selected by Ta, Ts
										To: Outside temp.
							and To for operation.
						• The operation is performed as
							shown in the following figure
							according to Ta value at the first
							time only. (In the range of Ts +
							α –1 < Ta < Ts + α + 1, Cooling
							thermo. OFF (Fan)/Setup air
							volume operation continues.)
							Cooling
			+1.0				operation
							Cooling thermo. OFF (Fan)
				Ta
				(˚C) Ts + α			• Setup air volume
			-1.0
							Heating
							operation
				• α is corrected according to the outside temperature.
				Outside temp.			Correction value (a)
				No To				0K		k = deg
				To ≥ 24°C				–1K
				24 > To ≥ 18°C				0K
				To < 18°C				+1K
				To error				0K
3	Room temp.	1)	Adjustment range: Remote controller setup temperature (°C)
	control
					COOL/DRY			HEAT	AUTO
				Wired type		18 to 29		18 to 29	18 to 29
			Wireless type			18 to 30		16 to 30	17 to 27

– 46 –