Toshiba RAV-SP454ATZ-E Attachment, No. Part name, Procedure, also take off this screw, Slit

No. Part name Procedure Remarks

2Front cabinet 1. Detachment

1) Perform work of item 1 of 1 . Motor support

2)	Remove screws (ST1T Ø4 × 8L, 2 pcs.) of
	the front cabinet and the inverter cover.
3)	Take off screws of the front cabinet and
	the bottom plate. (ST1T Ø4 × 8L 3 pcs.)
4)	Take off screws of the front cabinet and
	the motor support.
	(ST1T Ø4 × 8L, 2 pcs.)
	• The left side of the front side if made to	Front cabinet For single-phase type models,
	insert to the rear cabinet, so remove it
	pulling upward.	also take off this screw

3. Attachment			Front cabinet (Left side)
1)	Insert hook at the left side of the front side
	into the rear cabinet.
2)	Hook the lower part at the right side of the
	front to concavity of the bottom plate.	Slit	Claw
	Insert the hook of the rear cabinet into the
	slit of the front cabinet.

3)Attach the removed screws to the original positions.

Slit

Hook

Cord clamp

Front cabinet

Concavity at bottom plate

Lower slit

– 148 –