Toshiba RAV-SP804ATZ-E service manual Detachment, No. Part name, Procedure, Discharge port cabinet

No. Part name Procedure Remarks

2 Discharge	1. Detachment
port cabinet	1)	Carry out work of 1 of	1 .	Heat exchanger	Discharge port cabinet
	2)	Remove screws for the discharge port cabinet		Motor base	Partition plate
		and the partition plate.
		(ST1T Ø4 × 8, 3 pcs.)

3) Remove screws for the discharge port cabinet and the bottom plate.

(Hexagonal screw Ø4 × 10, 2 pcs.)

4)Remove screws of the discharge port cabinet and the motor base. (ST1T Ø4 × 8, 2 pcs.)

5)Remove screws of the discharge port cabinet and the heat exchanger.

(ST1T Ø4 × 8, 1 pc.)

6)Remove screws of the discharge port cabinet and the fin guard.

(Hexagonal screw Ø4 × 10, 2 pcs.)

Fin guard

3 Side cabinet 1) Carry out work of 1 of 1 .		Inverter assembly Side cabinet
2)	Remove screws which fix the inverter assembly
	and the side cabinet. (ST1T Ø4 × 8, 2 pcs.)
3)	Remove screws of the side cabinet and the valve
	fixing plate. (ST1T Ø4 × 8, 2 pcs.)
4) Remove screws of the side cabinet and the pipe
	panel (Rear).
	(Hexagonal screw Ø4 × 10, 2 pcs.)
5)	Remove screws of the side cabinet and the
	bottom plate. (Hexagonal screw Ø4 × 10, 1 pc.)
6)	Remove screws of the side cabinet and the heat
	exchanger. (Hexagonal screw Ø4 × 10, 3 pcs.)
7)	Slide the side cabinet upward and then remove it.
	(Hook of inverter)

Valve fixing plate

Piping panel (Rear)

– 155 –