Toshiba RAV-SP564ATZ-E, RAV-SP804ATZG-E, RAV-SP804ATZ-E, RAV-SP804AT-E Operation, Setup method, 115

12-1-5. Wiring and Setting of Remote Controller Control

2-remote controller control (Controlled by 2 remote controllers)

This control is to operate 1 or multiple indoor units are operated by 2 remote controllers.

(Max. 2 remote controllers are connectable.)

•When connected 2 remote controllers operate an indoor unit

Remote controller	Remote controller
switch (Master)	switch (Sub)
Sold	Sold
separately	separately
A B	A B
	Remote controller
	cables (Procured locally)
	Terminal block for
	remote controller cables

A B

Indoor unit

1 2 3

1 2 3

Outdoor unit

<Wired remote controller>

How to set wired remote controller as sub remote controller

Change DIP switch inside of the rear side of the remote controller switch from remote controller master to sub. (In case of RBC-AMT32E)

Remote controller (Inside of the rear side)

1 2

Sub remote controller

Master remote controller

1 2

DIP switch

1 2

<Wireless remote controller>

How to set wireless remote controller to sub remote controller

Change OFF of Bit [3: Remote controller Sub/Master] of switch S003 to ON.

•When connected 2 remote controllers operate the twin

Remote controller				Remote controller
switch (Master)				switch (Sub)
	Sold		Remote controller		Sold
			inter-unit wire
separately				separately
			(Procured locally)
	A	B			A	B

[Operation]

1.The operation contents can be changed by Last- push-priority.

2.Use a timer on either Master remote controller or Sub remote controller.

Terminal block for remote controller cables

A B

Indoor unit 1

1	2	3
1	2	3

Outdoor unit

A B

Indoor unit 2

1 2 3

Inter-unit wiring between indoor units (Procured locally)

(Setup method)

One or multiple indoor units are controlled by 2 remote controllers.

(Max. 2 remote controllers are connectable.)

– 115 –