Pioneer VSX-D2011-S NORMAL setup, Use the 5∞ buttons to select, NORMAL. Press the ENTER button

Setting Up for Surround Sound

NORMAL setup

This is the manual method to setup your sound parameters for surround sound. It is more exact than the QUICK setup and should give you finer surround sound. You don’t need to do this, however, if you did the AUTO SURROUND SOUND SETUP method on pages 13-15. If you feel the settings in the AUTO SURROUND SOUND SETUP do not suit your personal tastes, the settings you input here will override them and allow you to adjust the parameters manually. AUTO SURROUND SOUND SETUP with the microphone may not properly assess the size of your speakers if there is background noise, from an air conditioner or refrigerator, for example. If necessary try different possible settings here.

You only need to do these settings once (unless you change the placement of your current speaker system or add new speakers, etc.). If starting fresh, complete steps 1-3 in page 36.

VIDEO SEL		DIRECT ACCESS SEARCH MODE				1	Use the 5∞ buttons to select
		HI-BIT	+10	– DISC
9		0		ENTER
SYSTEM SETUP				GUIDE	1-2		NORMAL. Press the ENTER button.
TUNER EDIT				TRACK
MENU				TOP MENU
AUDIO		ENTER		RETURN			The setup possibilities appear on your TV.
				EXIT
MPX		TEXT ON	RF ATT	DISP MODE
¶		8		SUB TITLE		2	Use the 5∞ buttons to navigate
1		3		¡
TUNING	–	BAND		TUNING +			through the NORMAL setup menus.
STAT ON		TEXT OFF	C ASS	STAT ON +
1-2							When you have the setting you want in
							a particular menu, press ENTER.
							In each mode, the current settings are displayed. We
							suggest you adjust all these settings when you first hook
							up the receiver. That gets them out of the way and you
STANDBY/ON		STANDBY					won't need to return to this setting mode unless you
MOVIE MUSIC	ENTER						change your home set up by adding new speakers (etc.).

MULTI JOG

MULTI JOG CONTROL SIGNAL		HI-BIT	SB CH	BAND	SPEAKER SETTING (See pages 40-41)
SET UP	RETURN SELECT	HI-SAMPLING	MODE		Use to specify the type and number of speakers you
PHONES		TONE CONTROL
	SPEAKERS TONE	BASS/TREBLE
					connected.

SURROUND

1	1.Surround Setup
	[ SurrBack System ]
	[ Auto Setting		]
	[ Quick		]
	[	Normal	]
	[	Expert	]
	[ Exit		]

CHANNEL LEVEL (See page 42)

Use to balance the volumes of your different speakers. This is also necessary for the most realistic surround sound.

CHANNEL DELAY (See page 43)

Use to select the distance settings for each set of speak- ers. You must add distance settings to all your speakers for the most realistic surround sound. Adding a slight delay to some speakers enhances sound separation and is particularly important for achieving a surround sound effect. You need to figure out the distance from your listening position to your speakers to add the proper delay.

SET UP

2			See the next four pages for more information on these
	Normal		settings.
	[	Speaker Setting	]
	[	Channel Level	]
	[ Channel Delay		]
	[ Exit		]

39

En