Pioneer VSX-D2011-S, VSX-D2011-G manual Easy Setup Guide Part2, Hook up the microphone to

Easy Setup Guide Part2

1AUTO SURROUND SOUND SETUP

If setting up your surround sound speakers seems like it's going to be an involved task you only need to use this quick, automatic method, known as the MCACC system, to achieve good surround sound. You'll need to hook up the microphone so that the receiver can hear and judge the distance, size, sound character and sound pressure level of the speakers and thus know what settings to make.

First turn the volume down, then plug the microphone into the SETUP MIC jack on the front panel of the receiver and put the microphone into its stand. If you have a tripod you can affix the mic stand to it. Follow the step-by-step guide to setting up your surround sound below. This will customize the surround sound for your listening environment. If you want to personalize your surround sound setups by making the settings manually go to "Setting up for Surround Sound" (starting on page 36) and "Expert setup" (starting on page 95). Make sure all the components you need, especially speakers, have been properly connected before you do the steps described here. Use the arrow buttons (5∞) and the ENTER button on the remote control to navigate the on-screen display (OSD) on your TV. Conversely, you can use the MULTI JOG dial and ENTER button, and look at the display, on the Front Panel.

1	PHONES	TONE CONTROL		SETUP	STATION TUNING	MULTI JOG/ENTER		1	Hook up the microphone to the
	MULTI JOG CONTROL SIGNAL HI-BIT		SB CH	BAND CLASS		TUNER CHARACTER/ EON
	SET UP	RETURN SELECT HI-SAMPLING	MODE		SELECT	EDIT	SEARCH MODE		SETUP MIC jack on the Front Panel.
		SPEAKERS TONE BASS/TREBLE		MIC		S-VIDEOVIDEO INPUT	L AUDIO R
					DIGITAL IN	VIDEO

EASY SETUP GUIDE

microphone microphone stand

Center Speaker Front Speaker (R)

Surround Speaker (R)

Subwoofer

Front Speaker (L)

2Place the microphone at your normal listening position.

Use a table, chair or something else to put the microphone at the same height as you usually listen to your system from.

3Switch on the receiver and your TV.

Make sure your TV is set to this receiver as you will use the on-screen displays (OSDs) on your TV to follow these instructions.

Listening Position

Surround Back

Speaker (R)

Surround Speaker (L)

Surround Back Speaker (L)

SETUP

S0URCE	TV	SYSTEM RECEIVER		3
		OFF
DVD/LD	TV/SAT	VCR1/	TV CONT
		DVR
MULTI CONTROL
VCR2	VIDEO	CD	MULTI
			OPERATION

CD-R/	MD/	TUNER	RECEIVER	5
TAPE1	TAPE2

DIMMER LOUDNESS TONE EFFECT/CH SEL

4If you have a subwoofer turn it on.

5Press the RECEIVER button on the remote control.

6Press the SYSTEM SETUP button and use the on-screen display (OSD) that appears on your TV.

7The arrow should be pointing at SURROUND SETUP, press ENTER.

	1	2	3		4
	SIGNAL SEL	DNR	BASS/TREBLE	+
	5	6	7	–	8
	VIDEO SEL	HI-BIT	+10		DISC
6	9	0		ENTER
			DIRECT ACCESS SEARCH MODE
	SYSTEM SETUP			GUIDE		7-13
	MENU			TOP MENU
	TUNER EDIT			TRACK
		ENTER			EXIT
	AUDIO			RETURN

MPX	TEXT ON RF ATT	DISP MODE
¶	8	SUB TITLE
		+

7	System Setup
				]
	[	1. Surround Setup
	[2. THX CINEMA Setup ]
	[3.		Input Assign	]
	[4.		Function Rename	]
	[5.		PHONO/LINE Setup ]
	[Exit			]

13

En