Pioneer VSX-D2011-G 1 3 2, Channel Step Setting multi-voltagemodel only, Direct Access Tuning

Using the Tuner

Channel Step Setting (multi-voltage model only)

The unit has been factory preset to the channel allocation value for the area in which it is to be sold. If this value is set incorrectly, the tunes in frequency may be wrong, or sound may be distorted, resulting in an inability to reproduce reception signals at their proper sound quality. For this reason, be sure to confirm that the values are set correctly before first using the unit.

FM 50 kHz, AM 9 kHz:

Set to this position, for areas with an FM reception step of 50 kHz and AM 9 kHz.

FM 100 kHz, AM 10 kHz:

Set to this position for areas with an FM reception step of 100 kHz and AM 10 kHz.

memo When unsure about the channel allocation for your area, consult your dealer for correct information.

To Change Channel Steps

1Turn the power off (standby mode).

2While holding down the TONE – button press the STANDBY/ON button.

3When you see STEP 9K/50K or STEP 10K/100K appear in the display. To change channel steps again repeat steps 1 and 2.

Direct Access Tuning

The following steps show you how to tune directly to a specific frequency using the remote control.

SETUP

S0URCE	TV	SYSTEM RECEIVER
		OFF
DVD/LD	TV/SAT	VCR1/	TV CONT
		DVR
MULTI CONTROL
VCR2	VIDEO	CD	MULTI
			OPERATION

CD-R/	MD/	TUNER	RECEIVER
TAPE1	TAPE2

	DIMMER	LOUDNESS	TONE	EFFECT/CH SEL
4	1	2	3		4
	SIGNAL SEL	DNR	BASS/TREBLE	+
	5	6	7	–	8
	VIDEO SEL	HI-BIT	+10		DISC
	9	0		ENTER
			DIRECT ACCESS	SEARCH MODE
	SYSTEM SETUP			GUIDE
	MENU			TOP MENU
	TUNER EDIT			TRACK
		ENTER
					EXIT
	AUDIO			RETURN
	MPX	TEXT ON	RF ATT	DISP MODE
	¶	8		SUB TITLE
	TUNING –	BAND		TUNING +

1 3 ¡

STATION –	TEXT OFF	CLASS	STATION +
4	7		¢
CHANNEL–			CHANNEL+
	TV INPUT	INPUT
	TV CONTROL
TV VOL		MIDNIGHT	VOLUME
	TV CH
		MULTI CH
		INPUT

1

3

2

1Press the TUNER button.

This selects the tuner function on the receiver and sets the remote to the tuner operation mode.

2Press the BAND button to select the

band (FM or AM).

Each press switches the band : FM j AM

3Press the DIRECT ACCESS button to

activate the direct access tuning mode.

The cursor blinks in the display on the front panel.

SIGNAL	dB
ANALOG STEREO
SB CH
AUTO ON	MOVIE
OFF	MUSIC

SP A B

4Use the number buttons to enter the

frequency of the station you want.

Example:

To tune station 106.00 (FM), press: 1 = ` = 6 = ` =

`

To cancel before inputting the frequency

Press DIRECT ACCESS, and enter the frequency again.

58

En