Pioneer VSX-D2011-S Expert, Receiver, PIONEER component with an CONTROL terminals, Remote Control

Using Other Functions

The PIONEER SR System: Operating other PIONEER components

Connecting an optional control cord allows you to operate other PIONEER components simply by pointing the receiver's remote control at the remote sensor on the front panel of the receiver. The receiver then sends the remote control signals to the other devices via the CONTROL OUT terminal.

IN

CONTROL

OUT

CONTROL

IN

OUT

Receiver

1	2	3	4
5	6	7	8
		– +	+

9 0

¶8

–+

1 3 ¡

–+

4 7 ¢

–+

PIONEER component

with an CONTROL

terminals.

To CONTROL IN terminal of another PIONEER component with an CONTROL terminals.

Î

Remote Control

memo	• You can also control PIONEER components (and those made by other manufacturers) by pointing the
	receiver's remote control directly at the respective component. This type of operation does not re-
	quire control cords. All you have to do is recall the appropriate stored settings (see pages 66–67).

•If you use a remote control hooked up via the CONTROL IN jack with a control cord, you won't be able to use this unit's remote control.

•If you use this feature make sure an analog (audio and/or video) connection has been made between the units.

EXPERT

79

En