Pioneer VSX-D2011-G, VSX-D2011-S manual MULTI OPERATION button

Displays & Controls

!MULTI OPERATION button

Use this button to start the MULTI OPERATION mode. See page 80-81 for how to program and use the MULTI OPERATION mode.

@RECEIVER button

Use this button to switch the remote control into receiver mode in order to get certain receiver functions or do receiver setups.

#TOP MENU/GUIDE button

Use to find stations or menus on a digital TV tuner. For a DVD player use this button to bring up the DVD menu.

$RETURN button

When you are in a receiver setup operation this button will go back one step in the SYSTEM SETUP procedure. When you are using your DVD menu screen this button acts the same as the DVD player's "RETURN" button. When you are using cable tuners, satellite tuners or digital TV tuners this button will either exit you from the menu screen or act like a "RETURN" button above, depending on the maker of the unit.

%INPUT button

Press to select an input source. The button will cycle through all the possible sources.

^VOLUME (+/–) buttons

Use to raise or lower the volume of the receiver.

&MIDNIGHT button (see page 51)

Switches the MIDNIGHT listening mode on or off (for all modes except THX CINEMA and

MULTI CH IN).

*MUTE button

Press to mute or restore the volume.

(MULTI CH INPUT button (see page 53)

Use this button to select the component you have hooked up to the MULTI CH IN terminals (for example, a DVD-Audio player).

)ACOUSTIC EQ button (see pages 99- 101)

Press to switch on/off and select the type of acoustic calibration EQ.

_REMOTE SETUP button.

Use to customize the remote control functions and the remote control itself. (See “Setting Up the Remote Control to Control Other Compo- nents“ starting on page 66).

32

En