Pioneer VSX-D2011-G manual Setting Up for Surround Sound, Press the SYSTEM SETUP button, Enter

Setting Up for Surround Sound

To ensure the best possible surround sound, complete the following setup operations. Some of these are the same (and take precedence over) the settings you made in the Easy Setup Guide, so consider if the ones you made at that time were adequate. If you feel they were, move on to the next setting in this section.

These setup operations use on-screen displays (OSDs) on your TV to display the settings and choices so be sure your TV and receiver are properly hooked up and that your TV is set to this receiver. You need to connect the setup mic to the front panel of the receiver so that it can measure the sound and ensure the proper settings. For more information on the mic hookup see page 13. Use the arrow buttons (5∞) and the ENTER button on the remote control to navigate the OSDs on your TV. Conversely, you can use the MULTI JOG dial and ENTER button, and look at the display, on the Front Panel.

SETUP

1Turn on the receiver and your TV. Press the RECEIVER button on the remote control.

S0URCE TV SYSTEM RECEIVER

OFF

Make sure your TV is connected and set to the video input the receiver is using.

DVD/LD	TV/SAT	VCR1/
		DVR
MULTI CONTROL
VCR2	VIDEO	CD
CD-R/	MD/	TUNER
TAPE1	TAPE2
DIMMER	LOUDNESS	TONE

TV CONT
MULTI	1	2	Press the SYSTEM SETUP button.
OPERATION
RECEIVER			The menu possibilities appear on your TV.
EFFECT/CH SEL

	1	2	3	4
	SIGNAL SEL	DNR BASS/TREBLE +
	5	6	7	8	3	SURROUND SETUP should be selected. If
	9	0	+10	ENTER
	VIDEO SEL	HI-BIT		– DISC
2	MENU	DIRECT ACCESS SEARCH MODE				it isn’t use the 5∞ buttons to select it.
				TOP MENU
	SYSTEM SETUP			GUIDE	3-4
	TUNER EDIT			TRACK		Press the ENTER button.
		ENTER		EXIT
	AUDIO			RETURN
	MPX	TEXT ON	RF ATT	DISP MODE
	¶	8		SUB TITLE	4	Use the 5∞ buttons to navigate through
	1	3		¡
	TUNING –	BAND		TUNING +		the menus. When you have the setting
	STATION –	TEXT OFF	CLASS	STATION +
	4	7		¢
	CHANNEL–			CHANNEL+		you want in a particular menu, press
	3-4			2		ENTER.
						In each mode, the current settings are displayed. We suggest
						you do a basic system setup for surround sound when you
						first hook up the receiver. That gets it out of the way and you
						won't need to do it again unless you change your home set

STANDBY/ON

MOVIE MUSIC ENTER

MULTI JOG

STANDBY

MULTI JOG	CONTROL	SIGNAL	HI-BIT	SB CH	BAND
SET UP	RETURN	SELECT	HI-SAMPLING	MODE
PHONES			TONE CONTROL
	SPEAKERS	TONE	BASS/TREBLE

up (by adding new speakers, etc.). To do a basic setup use the SURRBACK menu if necessary and then choose either the AUTO SETTING, QUICK or NORMAL setup procedure and complete that. You don’t need to do all three as they accom- plish the same ends and we recommend the AUTO SETTING method.

To do a more advanced setup for surround sound see EXPERT setup starting on page 95.

SURRBACK (Surround Back) SYSTEM (See page 37) Use to choose options for your surround back speakers.

3	System Setup
				]
	[	1. Surround Setup
	[2. THX CINEMA Setup ]
	[3. Input Assign			]
	[4. Function Rename ]
	[5. PHONO/LINE Setup ]
	[Exit			]
4	1.Surround Setup
	[				]
			SurrBack System
	[		Auto Setting		]
	[ Quick			]
	[ Normal			]
	[ Expert			]
	[ Exit			]

AUTO SETTING (See page 13-15)

See the Easy Setup Guide Part 2 for an explanation of this setup.

QUICK setup (See page 38)

Use to setup your surround sound system in the minimum amount of time.

NORMAL setup (See page 39)

Use this method to manually adjust all the surround sound functions.

EXPERT setup (See pages 95-103)

Use these settings to fine tune your surround sound and make it more personalized.

36

En