Pioneer VSX-D2011-G, VSX-D2011-S manual Speaker impedance, Standby/On Speakers

Connecting Your Equipment

Speaker impedance

You can change the speaker impedance for VSX-D2011 but we recommend using speakers with an impedance of 8 Ω-16 Ω (the default setting). If you are using 6 Ω- less than 8 Ω impedance speakers, you need to change the impedance setting. Use any speaker rated between 6 Ω-16 Ω.

STANDBY/ON

SPEAKERS

AUDIO/VID

STANDBY/ON

STANDBY

MULTI CHANNNEL

ACOUSTIC CALIBRATION

First put the receiver in STANDBY mode, then press the power button while holding down the SPEAKERS button.

MOVIE MUSIC ENTER

MULTI JOG

The receiver will re-set to the new impedance setting. With this method you can choose the 8 Ω- 16 Ω setting or the 6 Ω-8 Ω setting.

To check which impedance setting to hold down the SPEAKERS button for 2-3 seconds. You'll get a display like these telling you the speaker impedance setting.

SIGNAL

ANALOG

SB CH

ON MOVIE AUTO OFF MUSIC

SP A B

SIGNAL

ANALOG

SB CH

ON MOVIE AUTO OFF MUSIC

SP A B

dB

dB

(This display indicates an

8Ω-16Ωimpedance setting.)

(This display indicates a 6Ω- less than 8Ω impedance setting.)

26

En