Pioneer VSX-D2011-G, VSX-D2011-S manual Quick setup

Setting Up for Surround Sound

QUICK setup

This simple and quick setup method allows you to make all the necessary settings manually with the minimum of hassle. If you did the AUTO SURROUND SOUND SETUP method on pages 13-15 you don’t need to do this setup. You must have front and surround speakers hooked up to use this setup.

You only need to do these settings once (unless you change the placement of your current speaker system or add new speakers, etc.). If starting fresh, complete steps 1-3 in page 36.

VIDEO SEL	HI-BIT	+10	– DISC		1	Use the 5∞ buttons to select QUICK.
9	DIRECT ACCESS SEARCH MODE
	0		ENTER
SYSTEM SETUP			GUIDE	1-4		Press the ENTER button.
TUNER EDIT			TRACK
MENU			TOP MENU
AUDIO	ENTER		RETURN			The setup possibilities appear on your TV.
			EXIT
MPX	TEXT ON	RF ATT	DISP MODE
¶	8		SUB TITLE		2	Use the 5∞ buttons to navigate
1	3		¡
TUNING –	BAND		TUNING +
1-4						through the QUICK setup menus. When
						you get a menu you want to adjust
						press ENTER.

STANDBY/ON

STANDBY

MOVIE MUSIC ENTER

MULTI JOG

MULTI JOG	CONTROL	SIGNAL	HI-BIT	SB CH	BAND
SET UP	RETURN	SELECT	HI-SAMPLING	MODE
PHONES			TONE CONTROL
	SPEAKERS	TONE	BASS/TREBLE

1	1.Surround Setup
	[ SurrBack System ]
	[ Auto Setting				]
	[	Quick			]
	[ Normal				]
	[ Expert				]
	[ Exit				]
2	QUICK
		Subwoofer			[ YES ]
		Center SP			[ YES ]
		SurrBack SP			[ YES ]
		Room size			[ Medium ]
		Listening Position
					[ Center ]
		[Exit]
4	QUICK
		Subwoofer			[ YES ]
		Center SP			[ YES ]
		SurrBack SP			[ YES ]
		Room size			[ Small	]
		Listening Position
					[ Front	]
		[	Exit	]

3In a menu use the 5∞ buttons to select the different settings. When you have the setting you want in a particular

menu, press ENTER.

Make the adjustments that match your home setup using the buttons described above.

SUBWOOFER setting:

If you connected a subwoofer select YES, if you didn’t select NO.

CENTER SP setting:

If you connected a CENTER speaker select YES, if you didn’t select NO.

SURRBACK SP setting:

If you connected a SURROUND speaker(s) select YES, if you didn’t select NO.

ROOM SIZE setting:

Tell the receiver your room size so it can equalize the speakers properly. Use the chart below for an approximate definition of the settings.

SMALL: 2.5 m by 3.5 m

MEDIUM: 4 m by 5 m

LARGE: 5.5 m by 7.5 m

LISTENING POSITION setting:

This setting establishes where your ideal listening position is. Choose from the three possibilities following the guide below.

FRONT: your listening position is closer to the front speakers.

CENTER: your listening position is equidistant to the front and surround speakers.

REAR: your listening position is closer to the surround speakers.

memo

38

If you do the QUICK setup after the AUTO SURROUND SOUND SETUP the former will replace the latter.

4Use the 5∞ buttons to select the EXIT.

Press the ENTER button.

You will return to the SURROUND SETUP menu display.

If you want to change a setting before proceeding

start over from step 1.

En