Pioneer VSX-D2011-S DUAL MONO setting and playback, Using Headphones, receiver in DUAL MONO mode

Basic Operation

DUAL MONO setting and playback

The dual mono setting can only be used when listening to Dolby Digital or homemade discs that have dual mono software encoded in them. Dual mono software usually is used to put two different mono soundtracks, that you have the capability of listening to at the same time, on one DVD. With this setting you can choose which dual mono setting you want to listen to. Remember this setting is only applicable if you are using Dolby Digital software with dual mono and want to isolate one of the channels therein.

MULTI JOG

CONTROL

SIGNAL

HI-BIT

SB CH

BAND

CLASS

STATION TUNING

TUNER

CHARACTER/

EON

SET UP

RETURN

SELECT

HI-SAMPLING

MODE

SELECT

EDIT

SEARCH

MODE

TONE CONTROL

MULTI JOG/ENTER

PHONES

SETUP

SPEAKERS

TONE

BASS/TREBLE

MIC

DIGITAL IN

S-VIDEO

VIDEO

L

AUDIO

R

VIDEO INPUT

1

1Press the RETURN button for more than three seconds to put the

receiver in DUAL MONO mode.

Hold down the RETURN button to cycle through the different DUAL MONO settings. When you find the one you want release the button. The L (ch1) and R (ch2) indicators in the display light to indicate the playback channel.

DUAL : ch1 DUAL : ch2

DUAL: ch1/ch2

The different settings are: DUAL ch1, where you only hear channel 1; DUAL ch2, where you only hear channel 2; and DUAL ch1/ch2, where you hear both channels, but independently from different speakers.

memo	• The default setting is DUAL ch1.
	• You can only use this function with Dolby Digital
	sources that have this function

Using Headphones

MULTI JOG

CONTROL

SIGNAL

HI-BIT

SB CH

BAND

CLASS

STATION TUNING

TUNER

CHARACTER/

EON

SET UP

RETURN

SELECT

HI-SAMPLING

MODE

SELECT

EDIT

SEARCH

MODE

TONE CONTROL

MULTI JOG/ENTER

PHONES

SETUP

SPEAKERS

TONE

BASS/TREBLE

MIC

DIGITAL IN

S-VIDEO

VIDEO

L

AUDIO

R

VIDEO INPUT

1Plug headphones into the PHONES

jack on the front of the receiver.

No sound will be audible from the speakers when headphones are plugged in except in MULTI CH IN mode or when using the pre-outs. In MULTI CH IN mode the subwoofer will be audible even if the headphones are plugged in.

BASIC

1 PHONES jack

memo • All SURROUND modes will be downmixed to 2 channels.

• If you’re listening to a 2 channel source there will be no matrix decoding (i.e. you will not be able to get surround sound decoding).

• For MULTI CH IN mode, only the signal input from the MULTI CH IN FRONT L and R channels can be heard.

55

En