Pioneer VSX-D2011-S, VSX-D2011-G manual 12 11, Displays & Controls

Displays & Controls

Display

All the display information is explained and/or referenced here.

1 2 3 4 5 6 7

	SIGNAL			PRO LOGIC Neo :6 LOUDNESS
	AUTO				DIGITAL
		RF		DTS ES EX
DIGITAL				STEREO
ANALOG
	SB CH				DSP
			ON		MOVIE
	AUTO
			OFF		MUSIC

LFE

SP A B

MIDNIGHT TONE DNR

STEREO MONO

TUNED RF ATT

RDS EON

Hi-BIT/

SAMPLING

dB

12 11 10

1SIGNAL SELECT indicators

Light to indicate the input signal you selected.

AUTO: Lights when the receiver is set to select the input signal automatically.

DIGITAL: Lights when digital audio signals are selected.

ANALOG: Lights when analog signals are selected.

2 Digital format indicators

PRO LOGIC II: Lights during Dolby Pro Logic II processing.

NEO:6: Lights during NEO:6 processing.

2DIGITAL: Lights when a Dolby Digital signal is detected.

DTS: Lights when a DTS signal is detected.

ES: Lights when playing back a DTS ES signal.

EX: Lights when playing back a Dolby Digital EX signal.

STEREO: Lights during two-channel playback.

3LOUDNESS indicator

Lights when LOUDNESS is on.

4MIDNIGHT indicator

Lights when MIDNIGHT is on.

5TONE indicator

Lights when the TONE control is on.

6DNR indicator

Lights when DIGITAL NR is on.

7TUNER indicators

STEREO: Lights when an FM stereo broadcast is received in the auto stereo mode.

MONO: Lights when the tuner is set to receive FM broadcasts and when MPX mode is selected.

TUNED: Lights when a broadcast is received.

RF ATT (European model only): Lights when the RF ATT is on (see p.57).

RDS (European model only): Lights when an RDS broadcast is received.

EON o (European model only): EON lights when it has been set. The dot indicator next to

	9	8	PREPARATION
	it lights when the station you are currently
	tuned to carries the EON data service.
8	Volume level indicator
9	Hi-BIT/SAMPLING indicator
	Lights when a HI-BIT/SAMPLING mode is on.
10	DSP indicators
	MOVIE: Lights when a MOVIE mode is
	selected. When a DSP MOVIE mode is select-
	ed DSP will light with a box around it.
	MUSIC: Lights when a MUSIC mode is
	selected. When a DSP MUSIC mode is select-
	ed DSP will light with a box around it.
11	Program Format indicators
	For Dolby Digital or DTS sources: These

indicators change according to which channels are active in the source. When all three LS (left surround), S (surround) and RS (right surround) light at the same time it means a source with a 6.1 channel playback flag is being used.

L – Left front channel.

C – Center channel.

R – Right front channel.

LS – Left surround channel.

S – Surround channel or Surround back channel.

RS – Right surround channel.

LFE – Low Frequency Effects channel.

‡– Lights when LFE signal is input.

12SB CH indicators

Light to indicate the status of the surround back channels.

AUTO – Lights when the SB CH MODE or VIRTUAL SURROUND BACK mode is set to AUTO.

ON – Lights when the SB CH MODE or VIRTUAL SURROUND BACK mode is set to ON.

OFF – Lights when the SB CH MODE or

VIRTUAL SURROUND BACK mode is set to 33

OFF.En