Toshiba RAV-SP454ATZG-E, RAV-SP804ATZG-E 147, Detachment, Attachment, Part name Procedure Remarks

14-2. Outdoor Unit

14-2-1. RAV-SP404AT-E, RAV-SP404ATZ-E, RAV-SP404ATZG-E RAV-SP454AT-E, RAV-SP454ATZ-E, RAV-SP454ATZG-E

No.	Part name			Procedure	Remarks
1	Common
				CAUTION
	procedure				Valve
			Never forget to put on the gloves at working		cover
			time, otherwise an injury will be caused by
			the parts, etc.
		1. Detachment
			1) Stop operation of the air conditioner, and
			turn off the main switch of the breaker for
			air conditioner.
			2) Remove the valve cover.
			(ST1T Ø4 × 8L, 1 pc.)
			• After removing screw, remove the valve		Wiring
			cover pulling it downward.
					cover
			3) Remove wiring cover
			(ST1T Ø4 × 8L, 2 pcs.), and then remove
			connecting cable.

4)Remove the upper cabinet. (ST1T Ø4 × 8L, 5 pcs.)

•After taking off screws, remove the upper cabinet pulling it upward.

2.Attachment

1) Attach the waterproof cover. Upper cabinet

	CAUTION
Be sure to attach a waterproof cover.		Water-proof
If it is not attached, there is a possibility that
		cover
water enters inside of the outdoor unit.
		Cord clamp

2)Attach the upper cabinet. (ST1T Ø4 × 8L, 5 pcs.)

•Hook the rear side of the upper cabinet to claw of the rear cabinet, and then put it on the front cabinet.

3)	Perform cabling of connecting cables, and	Rear cabinet
	fix with cord clamp.
	(ST1T Ø4 × 8L 3 pcs.)
4)	Attach the wiring cover.
	(ST1T Ø4 × 8L, 2 pcs.)
5)	Attach the valve cover.	Claw
	(ST1T Ø4 × 8L, 1 pc.)

•Insert the upper part of the upper cabinet, set hooking claw of the valve cover to the slit (at three positions) of the main body, and then attach it pushing upward.

– 147 –