Toshiba RAV-SP564ATZG-E Detachment, In case of drain pump incorporated model, Attachment

No. Part name Procedure Remarks

5 P.C. board	1. Detachment
assembly	1) Perform works 1. of 2 , 1. of 3 , and 1. of 4 .	P.C. board assembly
	2) Disconnect connectors which are connected
	from P.C. board assembly to other parts.
	NOTE)
	Unlock the lock of the housing to disconnect the
	connectors.
	CN41 : Remote controller terminal (2P: Blue)
	Remote controller terminal block: 2P
	CN67 : Power supply terminal (3P: Black)
	CN101 : TC sensor (2P: Black)
	CN102 : TCJ sensor (2P: Red)	Terminal block
	CN333 : Fan motor power supply (5P: White)
	CN334 : Detection of fan motor position (3P: White)

(In case of drain pump incorporated model)

CN34 : Float SW (3P: Red)

CN504 : Drain pump lead (2P: White)

3)Unlock the lock of the card edge spacer, and then remove P.C. board assembly.

2.Attachment

1)Attach P.C. board assembly to the card edge spacer.

2)Using wires connect connectors as before, which were disconnected in procedure 1. 2) of 5 .

	NOTE)
	Check there is no missing or poor contact of the connectors.
6 Multi blade fan case, 1.	Detachment
fan lower case,	1)	Perform work 1. of 2 .	Hanging hook
fan upper case
	2)	Take off hanging hooks at both sides of the
		lower fan case to remove fan lower case.
	3)	Remove the upper fan case while taking off
		hooks of fan upper case which are hooked to
		the partition board.
	4)	Loosen hexagonal hole screw of the multi
		blade fan to remove multi blade fan from the
		shaft. If necessary, remove multi blade fan
		and then remove fan upper case.
2. Attachment			Fan lower case
	1)	Determine the position so that multi blade fan	Multi blade fan
		positions at the center of the fan upper case,
		and then fix it with hexagonal hole screw.

NOTE)
Arrange the multi blade fan so that screws
position at the right side against the drain pan
assembly.
NOTE)
Fix multi blade fan with torque wrench 4.9 N•m
or more.
2) Hook the lower fan case as before and attach	Drain pan
	assembly side
it with hooks.
NOTE)
	Arrange the multi blade fan so that
Finally check whether the multi blade fan turns
	screws position at the right side
surely and smoothly or not.	against the drain pan assembly.

– 144 –