Toshiba RAV-SP564ATZ-E, RAV-SP804ATZG-E Repair defective position, Remove and improve

								<In case of SP80>
Check	Outdoor					Check and troubleshooting
code	LED display				(Item without special mention Indicates part of outdoor unit.)
[P03]	<Display 1>	<Display 2>	[Discharge temp. error]
	¡	¥
	¡	¥					YES
					Is there gas leak?			Repair defective position.
	¡	l
					Is there refrigerant shortage?			Recharge refrigerant.
	l	l
					NO
	¡	l					NO
	¡	¡		Is PMV under correct conditions?				Repair defective position.
								Replace defective part.
					YES		YES
			Does an abnormal overload happen?					Remove and improve
								the cause of overload.
					NO		NO
					Is connection of CN603 correct?			Correct connector.
			Is resistance value of TD sensor correct?					Sensor error → Replace
					YES
					Check outdoor P.C. board.
					Defect → Replace
[P04]			∗ There is a possibility that it is one of the following errors.
			Confirm LED on outdoor P.C. board to judge which error it is.
			Power supply error (Vdc), High pressure protective operation, Case thermostat
			operation
	<Display 1>	<Display 2>	[Case thermostat operation] → Refer to [H04] column.
	l	l
	l	l
	¡	¥
	l	l
	¡	l
	¡	¡
	<Display 1>	<Display 2>	[Power supply error] → Refer to [P05] column.
	¡	¥
	¡	l
	¡	¥
	l	l
	¡	l
	¡	¡
	<Display 1>	<Display 2>	[High pressure protective operation] →				Refer to [P20] column.

¡l

¡l

¡¥

l l

¡¥

¡¡

[P05] <Display 1> <Display 2> [Power supply error]

¡¥

¡	l	Is AC mains voltage correct?	NO
				Confirm power supply
¡	¥
		198 to 264V		construction, etc.
l	l
		YES
¡	l
¡	¡
		Check outdoor P.C. board.
		Defect → Replace

– 101 –