Lists the Using
Selecting a Component
Basic procedure for selecting a component
Do the procedure below to select a component from the function list. Note that the components contained in the list will vary depending on the receiver.
1Press FUNCTION.
The function list appears. The items in the list correspond with the jacks on the receiver.
CD
TUNER PHONO
2Move the easy scroll key to select a component from the list, then press the key to enter the selection.
Information about the component appears in the display window.
A display example
< C D | > |
| Selected component |
CD |
|
| Category |
|
| ||
Sony |
|
| Maker of the component |
|
|
zYou can modify the category indication
The category indication tells you what component is actually connected to the jacks on the receiver. If a component is connected to jacks for which they are not originally meant, you can modify the category indication to match the component. For details, see “Programming the Remote” on page 16.
zYou can turn on components automatically
You can set the remote to automatically turn on a component when it is selected from the function list. For details, see “Using the auto power function” on page 19.
zWhen selecting the MD/TAPE function on the receiver using
You can select either the TAPE or the MD function on the remote. We recommend programming the category of the component connected to the MD/TAPE jacks on the receiver to both the TAPE and the MD function on the remote.
Depending on the component that you selected, you may have to do an additional procedure, or you may be able to obtain detailed information about the component by doing an additional procedure. For details, see “Additional procedures after selecting a component” on this page.
Additional procedures after selecting a
component
If you have selected tuner
Do the procedure below after you have selected the tuner.
1Move the easy scroll key.
The preset station number list appears.
2Move the easy scroll key to select the preset station, then press the key to enter the selection.
14