Sony RM-LP204, RM-LP204M Other Operations, OFF, <BACK LIGHT> ON

Lists the Using

Performing Several Commands in Sequence Automatically (Macro Play)

Starting macro play

1Press FUNCTION.

The function list appears.

CD

TUNER PHONO

2Move the easy scroll key to select “MACRO 1” or “MACRO 2”, then press the key to enter the selection.

The IR codes appear in the display window as they are performed.

Notes

•Pressing any of the following buttons during a macro play operation will cancel the macro play sequence before it is complete.

–AV ?/1

–?/1

–SYSTEM STANDBY

–SOUND FIELD

–FUNCTION

–SET UP

•When the Macro Play function does not work properly, set “WAIT TIME” between each operation.

Other Operations

Turning the backlight on or off

Each time you press a button on the remote, the backlight turns on. If you do the procedure below to turn off the backlight, you can make the batteries last longer.

1Press SET UP.

The set up list appears.

2Move the easy scroll key to select “BACK LIGHT,” then press the key to enter the selection.

The BACK LIGHT list appears .

<BACK LIGHT> ON

OFF

3Move the easy scroll key to select “ON” or “OFF,” then press the key to enter the selection.

Clearing all the contents of remote‘s

memory

Be sure to turn on the receiver and point the remote towards the receiver when performing the following procedure.

1Press SET UP.

The set up list appears.

2Move the easy scroll key to select “ALL CLEAR”, then press the key to enter the selection.

3Move the easy scroll key to select “YES”, then press the key to enter the selection.

“CLEAR OK?” appears.

4Move the easy scroll key to select “YES” again, then press the key.

All the contents of the remote’s memory (i.e., all the programmed data) are cleared.

18