Using the auto power function

With the auto power function turned on, the commander sends numerous codes to the appropriate Sony AV components when you select a video function. Automatically, the components and the TV you have done IR setting turn on and the TV switches to the selected input mode. This function works for Sony components only.

1Press SET UP.

The set up list appears.

2Move the easy scroll key to select “AUTO POWER”, then press the key to enter the selection.

The AUTO POWER list appears .

<AUTO POWER> ON

OFF

3Move the easy scroll key to select “ON” or “OFF”, then press the key to enter the selection.

4When you select “ON”, move the easy scroll key to select the video input of the TV, then press the key to enter the selection.

<TV INPUT> TV-VIDEO1 TV-VIDEO2

Note

Switching to VIDEO 1~4 input may not be automatic on all Sony TVs. This is because some TVs cannot receive remote control codes immediately after being turned on.

Lists the Using

19