Making/Answering Calls
Handset
1{0} i l
2Dial the phone number. i {C}
Base unit
1{s}
2{0} i {P}
3Dial the phone number.
Note for handset and base unit:
L A 3 second pause is inserted each time lon the handset or {P} on the base unit is pressed. Repeat as needed to create longer pauses.
Answering calls
Using the handset
When a call is being received, the ringer indicator on the handset flashes.
1Lift the handset and press {C} or {s} when the unit rings.
L You can also answer the call by pressing any dial key from {0} to
{9}, {*}, or {#}. (Any key answer feature)
2When you finish talking, press {ih} or place the handset on the base unit or charger.
Auto talk
You can answer calls simply by lifting the handset off the base unit or charger. You do not need to press {C}. To turn this feature on, see page 23.
Adjusting the handset ringer volume Press {^} or {V} repeatedly to select the desired volume while the handset is ringing for an incoming call.
Note:
L You can also program the handset ringer volume beforehand (page 23).
Using the base unit
When a call is being received, the in use indicator flashes rapidly.
1Press {s} when the unit rings.
2Speak into the microphone.
3When you finish talking, press {s}.
Adjusting the base unit ringer volume
Press {^} or {V} repeatedly to select the desired volume.
L To turn the ringer off, press and hold {V} until the unit beeps.
Changing the base unit ringer tones
You can change the ringer tone used by the base unit.
1Press {^} or {V} when the base unit is in standby mode.
2Press {7} or {8} repeatedly to select the desired ringer tone. i{■}
Note:
L You can also select the desired tone by pressing a dial key ({1} – {6}) in step 2.
17
